Content for King For Canon 1DX 3rd Generation Firmware Upgrade

1.Special firmware for Canon EOS 1DX and support online upgrade.

2.Support flash power ratio output settings on camera

3.Support FEB function.

4.Support test flash output mode, such as flash under E-TTL mode, pre-flash ratio output.  Under M mode, the output ratio is according to the flash setting.

5.Support the zoom settings, M mode and ETTL mode on flash directly.

6.Support the shutter sync mode of a variety of flash, such as 1st curtain sync, 2nd curtain sync and high speed sync.

Note:

1.This upgrade is for both transmitter and receiver.

2.The serial number of King/Canon starting from 305312006001 has been updated to the latest firmware V1030 (full set).

3.Firmware upgrade operating instruction is in the zip file you download

4.Compatible cameras:1DX

Content for King For Canon 3rdGeneration Firmware Upgrade 

1.Modify the camera setup for flash power ratio output. 

2.Modify support FEB function. 

3.Modify the compatibility of camera, such as60D, 5D Mark III. 

4.Modify the test flash output mode, such as flash under E-TTL mode, pre-flash ratio output. Under M mode, the output ratio is according to the flash setting. 

5.The modification can support the zoom settings, M mode and ETTL mode on flash

6.Firmware upgrade operating instruction is in the zip file you download

Note: 

This firmware upgrade does not support Canon EOS 1DX camera. 

This upgrade is for both transmitter and receiver. 

Compatible cameras :40D,50D,60D,450D,550D,5D MarkII,5D Mark III,6D,7D,1D Mark III, 1D Mark IV,1DS,

                               1DS  MarkI II ,1DS  Mark III,10D,20D,30D,350D,400D,1D11

Update contents :
1. The timing and accuracy of flash can be optimized .  
2. Alarm function for low power is available, the Indicator will turn to red if under low power  
3. Some compatible BUG can be revised

Notice :
1.King for canon series has been updated King_Transmitter_V1020 version from the tracking number 600531005065 to 605531005544,there is no need to updated again .

2.King for canon series has been updated King_Transmitter_V1020 version from the tracking number 600531006264,there is no need to updated again .

Update contents :
1. The timing and accuracy of flash can be optimized .  
2. Alarm function for low power is available, the Indicator will turn to red if under low power  
3. Some compatible BUG can be revised

 
Notice :
1. King_Receiver_V1020 version can just be updated for King’s receiver.
2. King individual receiver products has been updated King_Receiver_V1020 version from the tracking number 300533003169 to 300533003648 ,there is no need to updated again .
3.King for canon series has been updated King_Transmitter_V1020 version from the tracking number 600531005065 to 605531005544,there is no need to updated again .
4.King for canon series has been updated King_Transmitter_V1020 version from the tracking number 600531006264,there is no need to updated again .

Update contents :
1. The timing and accuracy of flash can be optimized .  
2. Alarm function for low power is available, the Indicator will turn to red if under low power  
3. Some compatible BUG can be revised

Update contents :
A. Problem : it will be faulty with the first shoot or cannot shooting if there are different setup on transmitter and receiver .
B. Answer : Software need be updated to King_RX_V1010

Notice :
1. King_Receiver_V1010 version can just be updated for King’s receiver.
2. King individual receiver products has been updated King_Receiver_V1010 version from the tracking number 600533001033 ,there is no need to updated again .
3. King series has been updated King_Receiver_V1010 version from the tracking number 600531002389 ,there is no need to updated again
 

Update contents :
A. Problem : when set the flash with white balance and long shutter speed , the color of image will be a little dark blue .
B. Problem : it will be faulty with the first shoot or cannot shooting if there are different setup on transmitter and receiver
C. Answer : Software need be updated to King_Transmitter_V1010

Notice :
1. King_Transmitter_V1010 version can just be updated for King’ transmitter
2. King series has been updated King_Transmitter_V1010 version from the tracking number 600531002389 ,there is no need to updated again .
 

Update contents :
A. Problem : when set the flash with white balance and long shutter speed , the color of image will be a little dark blue .
B. Problem : it will be faulty with the first shoot or cannot shooting if there are different setup on transmitter and receiver
C. Answer : Software need be updated to King_Transmitter_V1011_Onlyfor60D

Notice :
1. this version is only for Canon 60D
2. this is only for King’s transmitter

Version :
this is the original version of the factory .

Notice :
1. King_Transmitter_V1000 can just be updated for King’s transmitter .
2. King series has been updated King_Transmitter_V1000 version from the tracking number 600531000001 to 600531002388 ,there is no need to updated again
 

Firmware King_Transmitter_V1001_Onlyfor60D are just used for Canon 60D , King series isn’t compatible with Canon 60D . please update King’s transmitter to King_Transmitter_V1001_60D if you use Canon 60D camera .